Hotline:
0579-84736588
Hotline:
0579-84736588
23
2022/11
Imitation die-casting pot, the process is similar to the stretching pot. The aluminum sheet is also used. The aluminum sheet of the imitation die-casting pot is thicker and pressed by the forging press. The cost and the threshold are improved. It can …
03
2022/03
1. Apply with edible oilWhen using for the first time, there is a layer of protective film on the non stick pan. Before using, it must be washed with clean water and wiped dry, and then coated with a thin layer of edible oil to maintain the coating on…
23
2021/10
1. Medical stone non-sticky permeable layerThe non-stick frying pan is made of natural maifan stone coating. The maifan stone is rich in many trace minerals, which makes the body of the pot harder, allowing you to be more casual in the cooking process…
18
2021/07
Nowadays, there are more and more types of pots on the market. They are bought and used indiscriminately without maintenance. They will break after a long time. The following editor will introduce several common maintenance methods for pots.The newly-…
10
2021/03
First wash it clean with detergent, then fill it with water, sprinkle with a little salt, and soak it for 24 hours before use.Before using the non-stick pan you bought, you should wash and dry the pan first, and apply a thin layer of cooking oil on th…
13
2020/11
1. The common ones are 18/10 or 18/8 stainless steel. The bottom of the pot is a composite bottom with pure aluminum to achieve uniform heat conduction. (The thermal conductivity of stainless steel is 15, and aluminum is 230). Rugged and durable, with…
29
2020/05
Any production process requirements are selected according to the product quality requirements, and the die casting pot blank has high quality requirements. It is mainly reflected in the surface roughness, high temperature baking, no bubbles, no pinho…
21
2020/05
(1) After the metal enters the cavity, it should be designed for the first impact position, so that it can be exhausted and the forward flow of smelting liquid should be stored. The side gate is selected for the die-casting pot, so the overflow groove…
22
2019/06
To ensure the quality of the product, the quality control point of the die-casting pot must be established at the primary part of the entire production process. Below, the non-stick pan export manufacturers, die-casting pot manufacturers and non-stick…
12
2019/05
The following is a description of what is a die-casting pot by die-casting pot manufacturers, stretching pot manufacturers and imitation die-casting pot manufacturers.The die-casting pot is made of cold-rolled sheet by servo-like cold extrusion and nu…
21
2019/04
Die-casting pot products for peoples life, so it has three major characteristics, one is the raw material can not contain harmful substances, the second is that it cannot sparkling appearance after baking, 3 it is to appearance, not a slim casting def…
19
2018/08
1. The manufacturing process of the pot is mainly divided into three types.The first one is a stretching pot, which is the simplest and lowest cost. It is used to make non-stick pans. It is usually made of aluminum and stretched with a stretching mach…
22
2018/05
Die-casting pot, process generally similar to drawing pot, also use aluminium, just copy aluminium die-casting pot thicker, use forging press down, the cost and the threshold, general middle and small factory can produce. The thickness of the pot body…
07
2017/09
On September 26, 2017-28, 22nd China hardware expo in zhejiang yongkang the grand opening of international convention and exhibition center, autumn every event, thousands of merchants gathered. Zhejiang RCL daily necessities co., LTD., was invited to …
09
2017/03
不锈钢指耐空气、蒸汽、水等弱腐蚀介质和酸、碱、盐等化学浸蚀性介质腐蚀的钢，它是由铁铬合金再掺入其他一些微量元素而制成的。由于其金属性能良好，并且比其他金属耐锈蚀，制成的器皿美观耐用。 1、不锈钢真的不生锈吗? 真正的不锈钢产品应该可以使用上百年而不…
21
2017/01
Cooking needs a variety of instruments. It is the hardware industry in both traditional and emerging products and services. The so-called traditional mainly refers to the 1980s as the base material is aluminum and iron products produced; the so-called…
17
2016/11
1. Appearance: Good pot with touch about the look and feel smooth texture, if you feel astringent grinding is not detailed enough. Then look at the pot handle and the pot body can achieve seamless effect, which is how much weight the handle can withst…
02
2016/10
Pot, Chinese people are the most indispensable daily necessities, lift the pot, people want most is the wok, in fact, with the development of society, pots and pans also make improvements change, especially when the housewives more and more attention …
24
2016/09
September 26, 2016 - 28, the 21st China Hardware Fair in Zhejiang Yongkang International Convention and Exhibition Center grand opening, the Autumn Fengsheng event, Wan Qi gathered. Zhejiang Honghai Commodity Co., Ltd. was invited to participate in th…
13
2016/08
Non-stick, by definition it is not stick cooking cooking pot. No matter the level of cooking, stick pan is one thing that is quite a headache, so nonstick this artifact came into being. His advent to peoples lives has brought great convenience, whe…
Add:Lengshui Industrial Zone,Panan,Zhejiang China
Tel:86-579-84736588
Mob:13566919856
Fax:86-579-84736168
E-mail:sales@hhcookware.com